Click here to make tpub.com your Home Page

Page Title: Magnesium
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 



PYROPHORIC METALS
DOE-HDBK-1081-94
Spontaneous Heating and Pyrophoricity
because of the likelihood of widespread radioactive contamination during a fire. Where such
combinations are essential to operations, appropriate engineering controls and emergency
procedures should be in place to prevent fires or quickly suppress fires in the event the
controls fail.
Because extinguishing fires in combustible metals involves techniques not commonly
encountered in conventional fire fighting operations, it is necessary for those responsible for
controlling combustible metal fires to be thoroughly trained prior to an actual fire emergency.
The following material discusses the properties of various combustible metals, conditions in
which they become pyrophoric, storage and handling practices, processing hazards, and
methods of extinguishing fires involving these kinds of metals.
Magnesium
Properties
The ignition temperature of massive magnesium is very close to its melting point of
650 C (1,202 F). (See Table 2.) However, ignition of magnesium in certain forms
may occur at temperatures well below 650 C (1,200 F). For example, magnesium
ribbons and shavings can be ignited under certain conditions at about 510 C (950 F),
and finely divided magnesium powder can ignite below 482 C (900 F).
Metal marketed under different trade names and commonly referred to as magnesium
may be one of a large number of different alloys containing magnesium, but also
significant percentages of aluminum, manganese, and zinc. Some of these alloys have
ignition temperatures considerably lower than pure magnesium, and certain
magnesium alloys will ignite at temperatures as low as 427 C (800 F). Flame
temperatures of magnesium and magnesium alloys can reach 1,371 C (2,500 F),
although flame height above the burning metal is usually less than 300 mm (12 in.).
As is the case with all combustible metals, the ease of ignition of magnesium depends
upon its size and shape. As noted earlier, the specific area of a combustible substance
is the surface area of the substance exposed to an oxidizing atmosphere per gram of
the substance and is usually expressed in cm2 /g. A combustible substance that has a
high specific area is more prone to oxidize, heat, and ignite spontaneously. Thin,
small pieces, such as ribbons, chips, and shavings, may be ignited by a match flame
whereas castings and other large pieces are difficult to ignite even with a torch
because of the high thermal conductivity of the metal. In order to ignite a large piece
of magnesium, it is usually necessary to raise the entire piece to the ignition
temperature.
Pyrophoricity
Page 20
Rev. 0


Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business