Quantcast Requirements for Hazard Control cont'd - hdbk11392003vol30080

 

Click here to make tpub.com your Home Page

Page Title: Requirements for Hazard Control cont'd
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Requirements for Hazard Control cont'd - hdbk11392003vol30079
Up
Chemical Management (Volume 3 of 3) Consolidated Chemical User Safety and Health Requirements - index
Next
Requirements for Hazard Control cont'd - hdbk11392003vol30081


DOE-HDBK-1139/3-2003
Sources10
Consolidated Requirements
4.5.19.1 Unless connected to a manifold, oxygen from
29CFR1910.253(b)(5)(ii)(P)
a cylinder shall not be used without a
regulator.
4.5.20 Approved gas regulators and pressure reducing valves
ANSI Z49.1, 10.7.1;
shall be used only for the gas and pressures for which
ANSI Z49.1, 10.7.2;
they are labeled.
CGA G-1, 5.3.3.4;
NFPA 51, 5-6;
NFPA 45, 8.1.5.2;
29CFR1910.253(a)(3);
29CFR1910.253(e)(6)(i)
4.5.21 Regulators, including their related gauges, shall be in
29CFR1926.350(h);
proper working order while in use.
4.5.21.1 Union nuts and connections shall be
ANSI Z49.1, 10.7.3;
inspected before cylinder use to detect faulty
seals, which could cause leakage. Faulty
29CFR1910.253(e)(6)(iv)
nuts and connectors shall be replaced.
4.5.21.2 A qualified mechanic shall perform repair of
ANSI Z49.1 10.7.6;
regulators or their parts.
CGA G-1, 5.1.5;
29CFR1910.253(e)(6)(ii)
4.5.22 Before a regulator is removed from a cylinder, the
ANSI Z49.1, 10.7.5;
cylinder valve shall be closed and the pressure released
ANSI Z49.1, 10.8.4.11;
from the regulator.
CGA G-1, 5.3.3.11;
CGA P-1, 3.8.6;
29CFR1910.253(b)(5)(iii)(D);
29CFR1926.350(d)(4)
4.5.23 Cylinder valves shall always be opened slowly to
ANSI Z49.1, 10.7.5;
prevent damage to the regulator.
ANSI Z49.1, 10.8.4.4;
CGA G-1, 5.3.3.7;
CGA P-1, 3.8.1.1;
29CFR1910.253(b)(5)(iii)(J);
29CFR1926.350(d)(2)
4.5.23.1 Personnel shall stand to the side and not in
ANSI Z49.1 10.8.4.4;
front of the regulator orifice when the cylinder
valve is opened.
CGA P-1, 3.8.1
56


Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.