Quantcast Inspect Lube Oil Cooler (water side)

 

Click here to make tpub.com your Home Page

Page Title: Inspect Lube Oil Cooler (water side)
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Appendix E Sample Performance Test cont'd
Up
Guide to Good Practices for the Design, Development, and Implementation of Examinations
Next
Inspect Lube Oil Cooler (water side) cont'd - hdbk12050068


DOE-HDBK-1205-97
APPENDIX E
SAMPLE PERFORMANCE TEST
TEST ID#
REV.#
PAGE
3
OF
5
TASK #:
TASK TITLE:
AVG. TIME TO PERFORM:
8123506447-3
Inspect Lube Oil Cooler
3 Hours
(water side)
Emergency Diesel Engine
PERFORMANCE CHECKLIST
Action Step
Standards
*
Sat
Unsat
P
1.
Obtained reference
Trainee obtained latest revised copies of
the procedures
P
2.
Obtain equipment
In accordance with NMPT A - 804.402
P
3.
Verify diesel tagged out
In accordance with NMPT 101.90
P
4.
Verify lubricating oil and cooling water
system drained and depressurized
In accordance with NMPT 801.B
P
5.
Disconnect oil supply and return from
lube oil cooler
In accordance with NMPT 801.B
P
6.
Disconnect water side supply and return
from lube oil cooler
In accordance with NMPT 801.B
P
7.
Remove lube oil cooler from mounting
brackets
In accordance with NMPT 801.B
P
8.
Remove lube oil cooler end bells
In accordance with NMPT 801.B
P
9.
Remove lube oil cooler tube bundle
In accordance with NMPT 801.B
P
10. Perform inspection and document
results
In accordance with NMPT Form 801
P
11. Complete Preventive Maintenance
Report
In accordance with NMPT 801.B
P
12. Reinstall tube bundle
In accordance with NMPT 801.B
P
13. Reinstall end bell
In accordance with NMPT 801.B
P
14. Reinstall lube oil cooler into mounting
bracket
In accordance with NMPT 801.B
P
15. Reconnect oil supply and return from
lube oil cooler
In accordance with NMPT 801.B
P
16. Reconnect water side supply and return
from lube oil cooler
In accordance with NMPT 801.B
P
17. Return equipment
P
18. Return references
CODES: *
(S) Sequence is important. This step must be performed only after the preceding step(s).
(C) Critical step. Failure to meet standards for this item constitutes failure of the test.
P, S, D, and O refer to performance methods Perform, Simulate, Discuss and Observe/Discuss.
E-5


Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.