Equipment Status Checks

DOE-STD-1041-93

appropriate. Approved supplemental lighting (e.g., flashlight, droplight, portable

lighting) should be used to inspect dimly lit work station areas. A checklist may

be used to ensure that all items are inspected. A list of some possible inspection

items is contained in Appendix A.

4.1.3.2 Equipment Status Checks

The status of equipment (i.e., operating, standby, work-in-progress, or

out-of-service) should be determined to ensure proper response to any problems

that may arise. Some possible status checks are as follows:

Operating Equipment

Motor and pump housing temperatures are within acceptable limits

System temperatures, pressures, and flows are within acceptable limits

Proper belt and coupling tightness

System leakage is within acceptable limits

Noise and vibration is within acceptable limits

Ventilation system intakes clear of debris

Equipment grounding straps connected

Power consumption (Amps, Fuel Oil)

Standby Equipment

Proper valve/circuit breaker lineup (spot check)

Oil levels are within acceptable limits

No unusual noises, smells, temperatures, or pressures

Out-of-Service Equipment

Boundary components in correct position (spot check).