Supplemental Information

IEEE 379-1977, "IEEE Standard Application of the

Single-Failure Criterion to Nuclear Power Generating Station

Class 1E Systems."

(This standard was revised and issued as

ANSI/IEEE 379-1988, "IEEE Standard Application of the Single-

Failure Criterion to Nuclear Power Generating Station Class 1E

Systems.")

IEEE 384-1977, "IEEE Standard Criteria for Indepen-

dence of Class 1E Equipment and Circuits."

(This standard was

revised and issued as ANSI/IEEE 384-1981, "IEEE Standard Criteria

for Independence of Class 1E Equipment and Circuits.")

ISA S67.04-1982, "Setpoints for Nuclear Safety-

Related Instrumentation Used in Nuclear Power Plants."

7.1.4

Supplemental Information

NUREG-0800,

USNRC "Standard Review Plan," June

1987.

SRP

7.1,

"Instrumentation and Controls -

Introduction."

SRP 7.1, Table 7-1, "Acceptance Criteria and

Guidelines for Instrumentation and Control Systems Important to

Safety."

SRP 7.1,

Table 7-2

"TMI Action Plan

Requirements for Instrumentation and Control Systems Important to

Safety."

7.2

A. 10 CFR 50.34, "Contents of Applications, Technical

Information."

10 CFR 50.55a, "Codes and Standards."

C. 10 CFR 50, Appendix A, "General Design Criteria for

Nuclear Power Plants. "

GDC 2, "Design Bases for Protection Against

Natural Phenomena."

GDC

"Environmental and Missile Design

Bases."

GDC 13, "Instrumentation and Control."

7-4