Codes and Standards - std1010011

DOE-STD-101-92

Regulatory Guide 3.39, "Standard Format and Content

of License Applications for Plutonium Processing and Fuel

Fabrication Plants."

Regulatory Guide 3.44, "Standard Format and Content

for the Safety Analysis Report for an Independent Spent Fuel

Storage Installation (Water Basin Type)."

Regulatory Guide 3.48, "Standard Format and Content

for the Safety Analysis Report for an Independent Spent Fuel

Storage Installation or Monitored Retrievable Storage Installa-

tion (Dry Storage)."

Regulatory Guide 3.50, "Standard Format and Content

for a License Application to Store Spent Fuel and High-Level

Radioactive Waste."

Regulatory Guide 3.52, "Standard Format and Content

for the Health and Safety Sections of License Renewal Applica-

tions for Uranium Processing and Fuel Fabrication."

Regulatory Guide 3.55, "Standard Format and Content

for the Health and Safety Sections of License Renewal Applica-

tions for Uranium Hexafluoride Production."

Regulatory Guide 3.61, "Standard Format and Content

for a Topical Safety Analysis Report for a Spent Fuel Dry Storage

Cask."

Regulatory Guide 3.62, "Standard Format and Content

for the Safety Analysis Report for Onsite Storage of Spent Fuel

Storage Casks."

1.3.3

Codes and Standards

None.

1.3.4

Supplementary Information

To avoid repetition, since the criteria provided in

these documents are pertinent to many sections of this guide,

they are listed only in this subsection. The following documents

provide criteria for the format and content of SARS and license

applications.

LA-11661-MS, Vol. I, "Guidance for the Prepa-

ration of Safety Analysis Reports," Howard, H.H. et al., LOS

Alamos National Laboratory, June 1990.

NUREG-1199, Rev. 1, "Standard Format and Con-

tent of a License Application for a Low-Level Radioactive Waste

Disposal Facility," January 1989.

1-5