Training/ Evaluation (T/E) Standards - Continued

MODULE NO:

PAGE

4 OF

STEP

S/C

T/E

TRAINEE

INITIALS

NO.

CODE

PROMPT

OJT/EVAL

When "Insert Hands" prompt

is displayed, insert hands

into detector openings,

pressing the ends of the

fingers firmly against the

stoppers so that the outer

detectors press against

hands.

Standard:

Jewelery that may damage the detector should not

be worn on hands.

Standard:

Remain in this position until count is complete.

OJT ENABLING OBJECTIVE NO. 2:

DEMONSTRATE THE PROPER USE

OF THE BERTHOLD MONITOR TO CHECK FOR CONTAMINATION ON THE

BODY.

STEP

S/C

T/E

TRAINEE

INITIALS

NO.

CODE

PROMPT

OJT/EVAL

Remove frisker from the

hook before moving feet.

Frisk starting at the top of

your head. Proceed downward,

checking your nose, mouth and

neck.

Check shoulders, arms, then

the torso and finally the

legs and feet.

Standard:

Move the frisker a maximum of 2 to 3 inches per second.

This is necessary to allow the meter time to respond. If

you move the probe too fast, you may

pass over

contamination and not record it. If an audible increase

in the count rate is noted, return the probe to the spot

and hold for a minimum of five seconds to determine if

contamination is actually present.

BADGE:

DATE:

OJT INSTRUCTOR SIGNATURE:

EVALUATOR SIGNATURE:

BADGE:

DATE:

TRAINEE/INCUMBENT SIGNATURE:

BADGE:

DATE:

B-15