Title Page - DOE-STD-1104-96

DOE-STD-1104-96

conditions in the SER not currently in place in these documents should identify an

expected schedule for completion.

Revisions of DSAs and TSRs, including DSA annual updates, undergo review and

approval. Review and approval of revisions are a matter of endorsing the incorporation

of changes in the safety basis since the last approval rather than performing a new

assessment of the previously approved safety basis documents. Modifications to the

facility operations not enc ompassed by the safety basis as documented in a DSA and

TSRs invoke the USQ process. Therefore, revisions are generally administrative and/or

editorial in nature in that they incorporate final disposition of USQs, and conditions of

approval stated in the existing SER, and/or minor changes that clarify the safety basis

documentation. For this reason, administrative and editorial revisions determined to not

involve a USQ, can be performed by the facility contractor at any time without prior DOE

approval. The facility contractor provides a copy of the revision, with a discussion of the

changes, to the approval authority within thirty (30) days of implementing the changes for

subsequent DOE review and approval. Review and approval of revisions of DSAs and

TS Rs do not typically warrant a significant new effort (e.g., detailed review plan, formal

review team) and may be as simple as merely indicating the latest revision numbers for

simple administrative and/or editorial changes.

SERs document the bases for app roving revisions, including annual updates. A SER for

a revision typically does not provide the complete basis of approval for that DSA and

TSRs and only provides the basis of approving changes in the provisions resulting from

the revision. Therefore, SERs for revisions are appended to the SER documenting the

last comprehensive determination of the basis of approval of the DSA and TSRs.

Collectively, a SER and its appendices provide the complete basis of approval for any

given DSA and TSRs. A SER without appendices is generated upon the next

comprehensive determination and documentation of the basis of approval for that DSA

and TSRs, or at the discretion of the approval authority.

The remainder of this chapter provides the recommended format and content for a SER.

The SER addresses only those issues that are germane to documenting the basis of

acceptance of the DSA and TSRs; therefore the SER is subject to the graded approach.

Summaries of material already contained in a DSA and TSRs should be brief but

sufficient to provide a knowledgeable reader a basic understanding of the basis of

approving these documents.

4.1

Title Page

The title page provides the unique identifier information for both the DSA and TSRs and

the SER. Minimum information consists of: (1) SER title, revision number, and date

issued; (2) title, revision number, and date issued for the DSA and TSRs; (3) facility name

and identification number, if any; (4) site; and (5) DOE contractor's name and appropriate

contract number.

4.2

Signature Page

The signature page provides the identification and signature of the approval authority,

and the date of the approval of the DSA and TSRs. Other signatures may be provided at

the discretion of the approval authority.

4.3

Executive Summary

This section pres ents summary information regarding the basis of approval of the DSA

and TSRs. The introduction contains the following information, briefly summarized: (1)

clear identification of the facility for which approval is being granted and its hazard