|
| DOE-STD-1128-98
Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities
--
To provide a basis for evaluating potential worker exposure on a job and in
ALARA preplanning.
--
to provide a baseline for trend analysis, investigation, and correction of
unusual conditions.
--
to track the status of jobs (including identification of good practices) and to
detect departures from good operating procedures and/or the failure of
radiation controls.
--
to identify the origin of radiation exposures in the plant by location, system,
or component.
Health physics personnel should post the results of radiation surveys or survey
high radiation areas. The results should be posted in the form of a survey map so
that personnel can be aware of the locations of higher and lower levels of radiation
within the area.
A survey data trending program should be conducted; to indicate the continuing
effectiveness of existing control; to warn of deterioration of control equipment or
effectiveness of operating procedures; to show long-term variations in radiation
levels; and to identify and correct improper radiation work practices.
Health physics should perform trend analyses on all permanent radiation, high
radiation, and very high radiation areas. At a minimum, one complete survey
record should be evaluated and included in the trend analysis program for each
survey required to be performed by the facility routine control program.
Health physics should use the facility reporting system to identify discrepancies
and abnormal trends and should summarize the data review results in their monthly
reports to the Radiological Protection Manager.
Survey data trends should be investigated when either:
--
an upward trend in general area radiation level occurs, causing a significant
increase.
--
an abrupt change in radiation level occurs that cannot be directly correlated to
normal activities.
3-8
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |