Preparation of Equipment/Materials

DOE-HDBK-1106-97

Lesson Plan

Instructor's Notes

5. Waste

Receptacles for radioactive waste should be located by

the work station so that you may conveniently dispose of

waste without further contamination of the work area.

State that later in the course

C. Preparation of Equipment/Materials

the selection and use of the

1. Assemble survey meters

proper instruments will be

covered (Section VI).

The survey meter should be turned on and located in

close proximity to the work station. A preoperational

check is necessary before use to ensure the meter is

working properly. Position the detector so it is directed

toward your work area. This will enable you to

conveniently monitor your hands as you work and also

can indicate when materials are removed from shielded

containers. Always work with the audio turned on. Your

safety and the safety of others must take priority over the

concept that the sound may be disturbing to others.

Know the location of the nearest phones. Post the

Radiological Control Organization phone number

nearby.

2. Equipment preparation

Use dedicated equipment/tools when appropriate.

Cover/tape tools or equipment used during the job to

minimize radioactive contamination.