Training requirements for specific materials

DOE-HDBK-1139/3-2005

Sources11

Consolidated Requirements12, 65, 66

4.7 Training requirements for specific materials

4.7.1

Compressed and Liquefied Gases in Portable Cylinders

NFPA 55, 1-3

Persons responsible for or working in the areas where

compressed gases are produced, stored, handled, or used shall be

trained in the chemical and physical properties of the materials

and the appropriate emergency response.

4.7.2

Storage of Liquid and Solid Oxidizers Persons involved in

NFPA 430, 2-7.1 and 2-7.2

operations where oxidizers are stored shall receive instruction in

handling the materials in a safe manner, including the

manufacturer's and processor's recommendations. Particular

attention shall be given to proper disposal of spilled material to

4.7.3

Storage of Organic Peroxides Personnel involved in operations

NFPA 432, 2-2

in organic peroxide storage areas shall be instructed in proper

and safe handling of such materials, proper use of personal

protective equipment, proper and safe disposal of spilled

material, and proper emergency procedures. Manufacturer's

instructions shall be consulted for each specific formulation.

4.7.4

Oxygen-fueled Gas Welding and Cutting

29CFR1910.253

4.7.4.1 Workmen in charge of the oxygen or fuel-gas supply

29CFR1910.253(a)(4)

equipment, including generators, and oxygen or fuel-gas

distribution piping systems shall be instructed and

judged competent by their employers for this important

work before being left in charge. Rules and instructions

covering the operation and maintenance of oxygen or

fuel-gas supply equipment including generators, and

oxygen or fuel-gas distribution piping systems shall be

readily available.

4.7.4.2 Regulators shall be repaired only by skilled mechanics

29CFR1910.253(e)(6)(ii)

with appropriate training.

135