Part 3 Radiological Worker Training - doe-std-1098-99cn1a0140

DOE-STD-1098-99

Radiological Control

Training and Qualification

March 2005

PART 3 Radiological Worker Training

Table 3-1 summarizes the requirements for those individuals who should receive Radiological Worker Training.

631 General Provisions

Each individual shall demonstrate knowledge of the radiation safety training topics established in Article 613.1,

commensurate with the hazards in the area and required controls, by successful completion of an examination and

appropriate performance demonstrations prior to being permitted unescorted access to radiological areas and prior

to performing unescorted assignments as a radiological worker [see 835.901(b)]. Radiological Worker Training

should include the DOE's core course training materials, as applicable, and should be expanded to include site-

specific information.

Workers may challenge DOE's Radiological Worker I or II core knowledge requirements by passing a

comprehensive examination. If unsuccessful in one attempt, the entire standardized core Radiological Worker I or

II Training should be completed. Challenges should not apply to the site-specific portions.

Radiological Worker I Training is not a prerequisite for Radiological Worker II training.

Radiological Worker II Training includes all of the requirements of Radiological Worker I Training and expands on

the topic of hands-on work with radioactive materials. Radiological Worker II Training prepares the worker to deal

with higher levels of radiation and radioactive contamination.

Individuals with current Radiological Worker I Training may be upgraded to allow unescorted access to other areas

by completing only the additional training provided in Radiological Worker II Training.

In the alternate year when training is not performed, refresher training should be completed.

If an escort is used in lieu of training, then the escort shall have completed the level of training required for the

areas to be entered and the work to be performed and shall ensure that the escorted individual complies with the

radiation protection program [see 835.901(d)].

632 Radiological Worker I

Site-specific Radiological Worker I Training, including High/Very High Radiation Area Training (Article 632.3),

should encompass at a minimum the following practical factors:

Entering and exiting simulated radiological buffer areas and radiation areas (and high radiation areas when

such training is included)

Performance of frisking for personnel contamination, as applicable

Verification of instrument response and source check

Proper response to alarm situations.

Course length will vary dependent upon the amount of site-specific material.

6-8