Document Identification

DOE-TSL-2-2006

4. GENERAL GUIDANCE

4.1

Document Identification. Standardization documents are assigned a

Functional Area identifier from the list in Appendix A. This list is an updated

version of the DoD Standardization Areas, as identified in SD-1, modified for

DOE Technical Standards. If applicable, DOE Technical Standards may be

assigned a more detailed FSC or FSG number, as presented in DoD Handbook

H2-1, in place of the Functional Area identifier. Following are some

examples:

v a standard on "Fire Protection" would be ca talogued under Functional

Area "FIRP";

v a standard on "Training" would be categorized under Functional Area

"TRNG";

v a standard on "Packing of HEPA Filters" would be categorized in the

more specialized Federal Supply Class "FSC 4460."

The DOE Technical Standards Style Guide defines the usage of applicable

FSC, FSG, and Functional Area assignments and specifies that they appear in

the lower right corner of the cover page of a DOE standard, specification,

handbook, or TSL. All DOE Technical Standards are listed in the Department

of Energy Standards Index , DOE-TSL-1, and include this assigned Functional

Area, FSC, or FSG classification as a part of the listing.

4.2

Identification of Points of Contact. The following paragraphs of this

TSL further identify the various points of contact for the DOE Technical

Standards Program as of August 1, 2006. Points of contact within DOE as

well as a link to points of contact within DoD are identified.

4.2.1

DOE Technical Standards Program Office. Points of contact in

the DOE Technical Standards Program Office (TSPO), including the