Industrial Safety Training

DOE-HDBK-1002-96

5. INDUSTRIAL SAFETY TRAINING

This section identifies the training program elements that will increase the trainee's awareness

of the hazards associated with the industrial environment, and with precautions that should be

followed in the performance of daily activities. This training is applicable to all chemical

operators. Additional training should be designed to cover those portions of the Facility

Industrial Safety Manual not addressed by this section or by the general employee training

program.

5.1 Lock and Tag Program

Instruction should be provided that will enable the trainee to perform the following:

Describe the general requirements of the facility lock and tag procedure, and other

related procedures

Describe general requirements for using various types of locks/tags

Locate the lockout/tagout log book and explain how to use it

State who is responsible to place and remove locks/tags

Demonstrate how to verify proper lockout/tagout prior to commencing work on

equipment

Explain the responsibilities assumed by individuals working within a locked/tagged

boundary

Explain the consequences of violating locks/tags

Demonstrate the step-by-step procedure to initiate, post, and remove each type of

lock/tag associated with job requirements at the facility

Explain controls on electronic lockouts/tagouts (DCS users)

Describe the types of magnitude of hazardous energy sources and the methods for

energy isolation and control.