Lineworker's Climbing Tools

DOE-HDBK-1092-98

OSHA Section 29 CFR 1910.132, 133, 135, 136, 137

OSHA Section 29 CFR 1926.951

Figure 7-3. Employees using special tools for climbing and for servicing high-voltage systems shall be

trained on how to use such tools and equipment.

7.7.1 LINEWORKER'S CLIMBING TOOLS

Employees should apply the following:

1. All climbers should be inspected frequently by the worker using them.

2. Climber gaffs should be kept sharp.

3. A climber shall not be used when its gaff becomes shorter than 1-1/4 in. inside measurement.

4. Climber straps that are worn or otherwise defective shall be replaced.

7.7.2 BODY BELTS AND SAFETY STRAPS

Employees using body belts and safety straps (work positioning equipment) should apply the

following:

7-22