Figure 10-9. Typical control instrumentation ground system

DOE-HDBK-1092-2004

Figure 10-9. Typical control instrumentation ground system.

5. Water column used as a high-voltage resistor

6. Standard coax cable used in special high-voltage pulsed circuits

7. Water column used as a charged-particle beam attenuator

8. Commercial cable tray used as a mechanical support for experimental apparatus.

10.9.2.2.2 DESIGN AND CONSTRUCTION

During design, special consideration should be given to installing interlocks and protective

barriers. Signs warning of the hazards should be posted to help prevent unsuspecting personnel

from being injured.

10.9.2.2.3 OPERATION AND MAINTENANCE

Appropriate safety procedures and training should be part of the process to qualify personnel.

The procedures should describe the methods used to promote safe work practices relating to

work on energized circuits in accordance with Section 2.1.2, Considerations for Working on

Energized Systems and Equipment, Section 2.13, Work Practices, and 29 CFR 1910.331-335.

10-22