Pink Holes

DOE-HDBK-1092-2004

7.7.6

PIKE POLES

Pike poles shall comply with the following:

1. Cracked, broken, or slivered pike poles should not be used;

2. Pike poles should not be thrown; and

3. When not in use and loaded on the truck, the points should be protected so that they will not

injure anyone.

7.7.7

HAND AXES AND SHARP TOOLS

Hand axes and sharp tools shall comply with the following:

1. Hand axes should not be used on overhead work; and

2. When not in use, sharp tools should be protected by the suitable guards or containers.

7.7.8

HANDLINES AND TAGLINES

Use high quality, nonconductive handlines and taglines. Keep them stored in a clean, dry

location and protected from damage and contamination. Wear clean gloves when handling

handlines and taglines to avoid contaminating the rope. Remove wet, dirty, or damaged ropes

from service.

7.8

TREE TRIMMING

Equipment used to trim trees shall be maintained in approved and proper working condition to

aid tree trimmers and protect them from hazards.

7.8.1

CARE AND USE OF TOOLS

Tools shall be cared for using the following methods:

1. The handles of all tree-trimming tools shall be kept well dressed and varnished.

2. When trimming trees near live conductors, the employee shall not work with wet tools or

ropes. Such equipment should be protected during rain showers.

3. A tree-trimming saw shall be protected by being put into its scabbard when it is not in use.

4. All ropes shall be inspected frequently for cuts and wear.

7.8.2

CLIMBING

The following shall be applied for climbing:

1. An employee should use a ladder to climb a tree, unless the employee is properly equipped

and trained for tree climbing.

7-20