References cont'd - hdbk109220040206

DOE-HDBK-1092-2004

IEEE 1100-1999, IEEE Recommended Practice for Powering and Grounding Electronic

Equipment.

IEEE/ANSI C-2, National Electrical Safety Code, 2002.

IEEE C62.11-1987, IEEE Standard for Metal-Oxide Surge Arrestors for AC Power Circuits.

IEEE/ANSI C95.1 (1999) Standard for Safety Levels With Respect to Human Exposure to

Radio Frequency Electromagnetic Fields, 3KHz to 3000GHz.

Instrument Society of America

ANSI/ISA RP12.06.01-2003, Wiring Practices

for

Hazardous

(Classified)

Locations,

Instrumentation Part 1: Intrinsic Safety.

ANSI/ISA - S82.01 - 1994, Safety Standard for Electrical and Electronic Test, Measuring,

Controlling, and Related Equipment - General Requirements.

ANSI/ISA - S82.02 - 1988, Safety Standard for Electrical and Electronic Test, Measuring,

Controlling, and Related Equipment: Electrical and Electronic Test and Measuring Equipment,

(Partial Revision and Redesignation of ANSI C39.5-1974).

ANSI/ISA - S82.03 - 1988, Safety Standard for Electrical and Electronic Test, Measuring,

Controlling, and Related Equipment: Electrical and Electronic Process Measurement and

Control Equipment, (Partial Revision and Redesignation of ANSI C39.5-1974).

National Electrical Manufacturers Association

NEMA 250-1997, Enclosures for Electrical Equipment (1000 Volt Maximum).

NEMA 280, Application Guide for Ground Fault Circuit Interrupters, 1990.

NEMA MG1, Motors and Generators, 2003.

NEMA PB2.2, Application Guide for Ground Fault Protection Devices for Equipment, 2004.

National Fire Protection Association

NFPA Handbook, Electrical Installations in Hazardous Locations, by P. J. Schram and M. W.

Earley, 2003.

NFPA 70, National Electrical Code, 2002.

NFPA 70B, Recommended Practice for Electrical Equipment Maintenance, 2002.

NFPA 70E, Standard for Electrical Safety in the Workplace, 2004.

NFPA 72, National Fire Alarm Code, 2002.

NFPA 77, Recommended Practice on Static Electricity, 2000.

NFPA 101, Life Safety Code, 1997.

12-4