Termination and Restoration

DOE-HDBK-1099-96

Termination and Restoration -

Termination

1) States the event(s) that indicate when the drill should be concluded.

The facility condition(s) that ensures all required and expected actions

have been completed and the facility can continue to operate or be

shutdown safely should be identified. 2) States the event(s) that would

cause an immediate termination of the drill due to a safety problem, TSR

violation, or other problem, and would require immediate actions to place

the facility in a safe condition.

Restoration

Identifies any systems, components, or equipment that must be reset to

normal operating status at the conclusion of the drill. This section could

also be used as a verification section to ensure the reset of these items. It

should include a mechanism to ensure restoration of the cues and props

used in the drill.