Preparation of Equipment/Materials

DOE-HDBK-1106-97

Waste

Receptacles for radioactive waste should be located by the work station so you may

conveniently dispose of waste without further contamination of the work area.

Preparation of Equipment/Materials

Assemble survey meters

The survey meter should be turned on and located in close proximity to the work

station. A pre-operational check is necessary before use to ensure the meter is

working properly. Position the detector so it is directed toward your work area. This

will enable you to conveniently monitor your hands as you work and also can

indicate when materials are removed from shielded containers. Always work with

the audio turned on. Your safety and the safety of others must take priority over the

concept that the sound may be disturbing to others. Know the location of nearby

phones. Post the Radiological Control Organization phone number nearby.

Equipment preparation

Use dedicated equipment/tools when appropriate. Cover/tape tools or equipment

used during the job to minimize radioactive contamination.

Assemble materials and supplies

Those supplies that would minimize small spills of radioactive materials should be

within arm's reach while handling unsealed radioactive materials.

Marking and labeling

The area/material is marked and labeled as appropriate (typically by

Radiological Control personnel).

Do NOT discard intact radioactive labels/markings in normal trash!