Preparation of Equipment/Materials

DOE-HDBK-1106-97

Lesson Plan

Instructor's Notes

Waste

Receptacles for radioactive waste should be located

by the work station so that you may conveniently

dispose of waste without further contamination of the

work area.

State that later in the

Preparation of Equipment/Materials

course the selection and

Assemble survey meters

use of the proper

instruments will be

The survey meter should be turned on and located in

covered (Section VI).

close proximity to the work station. A pre-

operational check is necessary before use to ensure

the meter is working properly. Position the detector

so it is directed toward your work area. This will

enable you to conveniently monitor your hands as

you work and also can indicate when materials are

removed from shielded containers. Always work

with the audio turned on. Your safety and the safety

of others must take priority over the concept that the

sound may be disturbing to others. Know the

location of the nearest phones. Post the Radiological

Control Organization phone number nearby.

Equipment preparation

Use dedicated equipment/tools when appropriate.

Cover/tape tools or equipment used during the job to

minimize radioactive contamination.