Attachment 3 - Sample Job Scenario

DOE-HDBK-1130-98

Module 10.1 : Sample Job Scenario

Attachment 3

ATTACHMENT 3 - Sample Job Scenario

Each facility should develop a job scenario and record it on a facility-specific RWP. (Refer to

DOE Radiological Control Technical Standard for guidance on the development of RWPs.) The

following is an example of a job scenario and radiological information.

JOB DESCRIPTION: Enter mock-up area and move the box that is located on

the floor in a lower dose rate area to the storage cabinet located in the

area. (A contamination area is located near the Job Site.)

LOCATION: Mock-up area, Building 2.

SPECIAL INSTRUCTIONS: RWP not valid for Contamination Area.

Avoid drum in Radiation Area.

RADIATION LEVELS: 80 mR/hr near drum on left side of work area.

25 mR/hr near cabinet and panel on north wall.

5 mR/hr near step-off pad area.

CONTAMINATION LEVELS: 5,000 dpm/100 cm2 floor of Contamination

Area.

PROTECTIVE CLOTHING: None.

DOSIMETER(S): TLD and pocket dosimeter (self-reader).

131