 |
|||
|
|
|||
|
Page Title:
Record the Appropriate Information on the RWP |
|
||
| ||||||||||
|
|  DOE-HDBK-1130-98
Module 10.1: Practical Factors
Instructor's Notes
B.
Record the Appropriate Information on the
EO2 Record appropriate
RWP
information on the RWP.
(DOE RCS Article 322)
After reviewing the RWP and identifying the
applicable requirements, workers must record the
appropriate information.
Suggest: Using a facility-specific RWP, have
students practice completing appropriate
information on RWP sign- in sheet.
Incorporate lessons learned occurrences, if
applicable. (Demonstrate or discuss occurrence.)
C.
Select and Wear Required Dosimeter(s)
EO3 Select and wear
Radiological Control personnel identify the
dosimeter(s) as per RWP.
dosimeter requirements necessary for entry on the
(DOE RCS, Chapter 5.)
RWP. Supplemental pocket dosimeters should be
worn near the primary dosimeter.
Suggest: Using a facility-specific RWP, have
students select dosimeter(s) per RWP and properly
wear the device.
Incorporate lessons learned occurrences, if
applicable. (Demonstrate or discuss occurrences.)
EO4 Enter a simulated area
D.
Enter Simulated Area and Demonstrate ALARA
and perform a specified
Techniques
task/job using ALARA
techniques.
Suggest: From this point on, the instructor should
demonstrate entering, performing tasks ,and exiting
simulated area using the techniques listed in the
lesson plan. This demonstration should cover
sections D and E of this lesson plan. After
instructor has completed demonstration, if
practical, have student do the same.
Incorporate lessons learned occurrences, if
applicable (Demonstrate or discuss occurrences).
Once the worker has donned the dosimeter(s) and
recorded the appropriate information on the RWP
sign in sheet, he/she should proceed directly to the
work area. At a minimum, the following ALARA
techniques should be used.
103
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals