Click here to make tpub.com your Home Page

Page Title: Don Protective Clothing and Dosimeter(s)
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 



DOE-HDBK-1130-98
b.
The required clothing will be identified on the RWP.
D. Don Protective Clothing and Dosimeter(s)
Once the radiological worker has obtained appropriate items, he/she must properly don the
protective clothing. Workers should inspect protective clothing prior to use for tears, holes, or
split seams that would diminish protection. Any defective items should be replaced with intact
protective clothing.
C
Suggest: Using facility-specific posted instructions, the instructor should don the
protective clothing. If practical have students do the same.
C
Incorporate lessons learned and occurrences, if applicable. (Demonstrate or discuss
occurrences.)
E. Enter Simulated Area and Demonstrate Contamination Control and ALARA Techniques
Once the worker has donned protective clothing and recorded the appropriate information on
the RWP, he/she should proceed directly to the work area. At a minimum, the following
contamination control and ALARA techniques should be used.
C
Suggest: The instructor should demonstrate entering, performing tasks, and exiting
simulated area using the techniques listed in the lesson plan. This demonstration should
cover sections E through G of this lesson plan. After instructor has completed
demonstration, if practical, have student do the same.
C
Incorporate lessons learned occurrences. (Demonstrate or discuss occurrences.)
1.
Take only the necessary tools and equipment into a Radiological Buffer Area or a
Contamination Area.
2.
Read and comply with all posted instructions.
3.
While in a radiological area, do not touch any uncovered portions of the body.
4.
Perform work safely and efficiently.
5.
Use time, distance, and shielding.
a.
When possible, maximize distance from higher radiation areas.
b.
When possible, stay in areas that have lower contamination levels.
c.
Do not loiter in the area.
d.
Avoid hot spots.
6.
Change outer gloves when instructed by Radiological Control personnel, or periodically
while working with contaminated or highly contaminated equipment.
7.
Use good housekeeping techniques.
92


Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business