 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|  DOE-HDBK-1130-98
Module 9: Radioactive Contamination Control
Instructor's Notes
d.
During pre-job briefings, discuss measures that will
help reduce or prevent contamination spread. The
agreed upon measures should be implemented by
workers at the job site.
e.
Change protective gear (e.g., gloves) as necessary
(typically as directed by Radiological Control
personnel) to prevent cross-contamination.
f.
Stage areas to prevent contamination spread from
work activities.
1)
Cover work area to minimize cleanup
afterward.
2)
Cover piping/equipment below a work area to
prevent dripping contamination onto cleaner
areas.
3)
Cap contaminated pipes or systems when not
in use.
g.
Prepare tools and equipment to prevent
contamination.
1)
Bag or sleeve hoses and lines to prevent
contamination.
2)
Minimize the equipment and tools taken into
and out of contamination areas.
3)
Cover/tape tools or equipment used during the
job to minimize decontamination after the job
(i.e., taping up a screwdriver before use).
h.
Use good housekeeping practices; clean up during
and after jobs.
"Good Housekeeping" is a prime factor in an
effective contamination control program. Each
radiological worker should keep his/her work area
neat and clean to control the spread of
contamination.
90
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals