Design Analysis and Calculations

DOESTD107393

Calculations or analyses that verify that the design inputs and constraints are met

- Component classification evaluations

- Load sequencing and electrical supply sizing calculations

- Setpoint calculations and methodologies

- Equipment sizing calculations

- Motor-operated valve calculations, analyses, or test results that establish switch

setting/tolerances

Design baseline analysis and calculations to establish effects of postulated accidents:

- Transient analysis

- Site Hazards analysis

- Seismic site specific criteria

- Flooding site specific criteria

- Ultimate heat sink analysis

- Loss of spent fuel cooling analysis

- Anticipated transient without scram

Instrument and Electrical

- Diesel generator sizing

- Power and instrument cable sizing

- System voltage profiles

- System short circuit analysis

- Diesel generator performance

- Bus transfer analysis

- System protection and coordination analysis - Battery sizing

- Instrument accuracy calculations

- Instrument Setpoint calculations

- Current loop response time calculations

- Electrical separation analysis

- Raceway fill and loading

- Failure modes and effects analysis

- Thermal form evaluation

- Electromagnetic compatibility

- Surge withstand capability

- Control room design review

- Set point tolerance

- Calibration and scaling calculations

- Lightning protection analyses

- Emergency lighting calculations

- Motor starting calculations

- Station blackout analysis

- Offsite/onsite independence

- Operator response time calculations

Nuclear

- Control room habitability analysis

- Tornado loadings and external missile,

- External flooding analysis

- Pipe break effects

- Equipment environmental qualification

- Radiation source term identification

II-B-3