Codes and Standards - std0100t0068

1.37, "Quality Assurance

Guide

Regulatory

Requirements for Cleaning of Fluid Systems and Associated Com-

ponents of Water-Cooled Nuclear Power Plants."

"Control of the Use of

1.44,

Guide

Regulatory

Sensitized Stainless Steel."

1.50, "Control of Preheat

Guide

Regulatory

Temperature for Welding of Low-Alloy Steel."

1.54, "Quality Assurance

Guide

Regulatory

Requirements for Protective Coatings Applied to Water-Cooled

Nuclear Power Plants."

Branch Technical Position MTEB 5-7,

SRP 5.2.3,

"Material Selection and Processing Guidelines for BWR Coolant

Pressure Boundary Piping."

Branch Technical Position MTEB 6-1,

SRP 6.1.1,

"pH for Emergency Coolant Water for PWRs."

6.1.3

Codes and Standards

45.2.1-1973, "Cleaning of Fluid Systems and

ANSI

Associated Components During Construction Phase of Nuclear Power

Plants."

(This standard was withdrawn November 21, 1985 and

incorporated into ANSI/ASME NQA-2-1986, "Quality Assurance

Requirements for Nuclear Power Plants.")

ANSI N101.2-1972, "Protective Coatings (Paints)

(This

for Light Water Nuclear Reactor Containment Facilities."

standard was withdrawn in 1983; it was replaced by the "Manual of

Coating Work for Light-Water Nuclear Power Plant Primary Contain-

ment and Other Safety-Related Facilities," ASTM, 1979.)

N101.4-1972, "Quality Assurance for Pro-

ANSI

tective Coatings Applied to Nuclear Facilities."

(This standard

was withdrawn in 1983; it was replaced by the "Manual of Coating

Work for Light-Water Nuclear Power Plant Primary Containment and

Other Safety-Related Facilities," ASTM, 1979.)

ASME Boiler and Pressure Vessel Code.

Section II, "Material Specifications."

Section III, "Rules for Construction

Nuclear Power Plant Components," Division 1 and Division 2.

Section IX, "Qualification Standard for Weld-

ing and Brazing Procedures, Welders, Brazers, and Welding and

Brazing Operators."

6-2