Safety Parameter Display System (SPDS)

Nuclear Utility Task Action Committee (NUTAC)

Reports:

INPO 83-047 (NUTAC), "Component Verification

and System Validation Guideline," Institute of Nuclear Power

Operations/CRDR NUTAC, December 1983.

83-046 (NUTAC), "Control Room Design

INPO

Review Task Analysis Guideline," Institute of Nuclear Power Oper-

ations/CRDR NUTAC, December 1983.

83-042 (NUTAC), "Control Room Design

INPO

Review Survey Development Guideline," Institute of Nuclear Power

Operations/CRDR NUTAC, November 1983.

83-026 (NUTAC), "Control Room Design

INPO

Review Implementation Guideline," Institute of Nuclear Power

Operations/CRDR NUTAC, July 1983.

INPO 83-036 (NUTAC), "Human Engineering Prin-

ciples for Control Room Design Review," Institute of Nuclear

Power Operations/CRDR NUTAC, September 1983.

This section identifies criteria for the review of human

engineering principles applied to the SPDS review of the

verification and validation program relating to SPDS design,

testing, human performance aspects, hardware and software qual-

ity, and parameter displays, and review of the adequacy and basis

of the parameters selected for display to represent critical

plant functions.

Code of Federal Regulations

18.2.1

10 CFR 50.34(f), "Contents of Application; Techni-

cal Information."

10 CFR 50, Appendix A, "General Design Criteria for

Nuclear Power Plants."

GDC 19, "Control room."

USNRC Regulatory Guides, SRP Branch Technical Positions

18.2.2

and Appendices

Regulatory

Guide

Light-Water-Cooled Nuclear Power Plants to Assess Plant and

Environs Conditions During and Following an Accident."

18-3