USNRC Regulatory Guides, SRP Branch Technical Positions and Appendices

USNRC Regulatory Guides, SRP Branch Technical Positions

3.9.2

and Appendices

Guide 1.20, "Comprehensive Vibration

Regulatory

Assessment Program for Reactor Internals During Preoperational

and Initial Startup Testing."

Regulatory Guide 1.26, "Quality Group Classifica-

tions and Standards for Water-, Steam-, and Radioactive-Waste-

Containing Components of Nuclear Power Plants."

1.29, "Seismic Design Classifi-

Regulatory

Guide

cation."

Regulatory Guide 1.61, "Damping Values for Seis-

mic Design of Nuclear Power Plants."

Regulatory Guide 1.68, "Initial Test Programs for

Water-Cooled Nuclear Power Plants."

Regulatory Guide 1.92, "Combining Modal Responses

and Spatial Components in Seismic Response Analysis."

Regulatory Guide 1.124, "Service Limits and Load-

ing Combinations for Class 1 Linear-Type Component Supports."

Regulatory Guide 1.130, "Service Limits and Load-

ing Combinations for Class 1 Plate- and Shell-Type Component Sup-

ports."

SRP

3.9.3, Appendix A, "Stress Limits for ASME

Class 1, 2, and 3 Components and Component Supports of Safety-

Related Systems and Class CS Core Support Structures Under

Specified Service Loading Combinations."

3.9.3

Codes and Standards

ANSI B16.5-1977, "Steel Pipe Flanges and Flanged

Fittings, Steel, Nickel Alloy, and Other Special Alloys."

(This

standard was revised and issued as ANSI/ASME B16.5-1981, "Pipe

Flanges and Flanged Fittings.")

ANSI B16.11-1980, "Forged Steel Fittings, Socket-

Welding and Threaded."

ANSI B16.34-1977, "Valves, Flanged and Butt-Welding

End Steel, Nickel Alloy, and Other Special Alloys."

(This stan-

dard was revised and issued as ANSI B16.34-1988, "Valves-Flanged,

Buttwelding and Threaded End.")

3-14