USNRC Regulatory Guides, SRP Branch Technical Positions and Appendices

USNRC Regulatory Guides, SRP Branch Technical Positions

3.10.2

and Appendices

1.61, "Damping Values for Seis-

Regulatory Guide

mic Design of Nuclear Power Plants."

1.89, "Environmental Qualifica-

Regulatory Guide

tion of Certain Electric Equipment Important to Safety for

Nuclear Power Plants."

1.92, "Combining Modal

Regulatory

Guide

Responses and Spatial Components in Seismic Response Analysis."

1.100, "Seismic Qualification

Guide

Regulatory

of Electric and Mechanical Equipment for Nuclear Power Plants."

1.148, "Functional Specifica-

Regulatory Guide

tion for Active Valve Assemblies in Systems Important to Safety

in Nuclear Power Plants."

Codes and 8tandards

3.10.3

ANSI B16.41-1975, "Functional Qualification

Requirements for Power Operated Active Valve Assemblies for

Nuclear Power Plants."

(This standard was revised and issued as

ANSI B16.41-1983, "Functional Qualification Requirements for

Power Operated Valve Assemblies for Nuclear Power Plants.")

ANSI N278.1-1975 (R1985), "Self-Operated and Power-

Operated Safety-Related Valves Functional Specification Stan-

dard."

ANS1/IEEE 323-1974, "IEEE Standard for Qualifying

Class 1E Equipment for Nuclear Power Generating Stations." (This

standard was revised and issued as ANSI/IEEE 323-1984, "IEEE

Standard for Qualifying Class 1E Equipment for Nuclear Power Gen-

erating Stations.")

ANSI/IEEE 344-1987, "IEEE Recommended Practice for

Seismic Qualification of Class 1E Equipment for Nuclear Power

Generating Stations."

3.10.4

Supplementary Information

USNRC "Standard Review Plan," June

NUREG-0800,

1987.

SRP 3.10,

"Seismic and Dynamic Qualifica-

tion of Mechanical and Electrical Equipment."

NUREG-103O, "Seismic Qualification of Equipment in

Operating Nuclear Power Plants," USNRC, February 1987.

3-17