Codes and Standards - std1010068

DOE-STD-101-92

Codes and Standards

4.5.3

ANSI/ANS 57.7-1981, "Design Criteria for an Inde-

pendent Spent Fuel Storage Installation (Water-Basin Type) ."

(This standard was revised and issued as ANSI/ANS 57.7-1988,

"Design Criteria for an Independent Spent Fuel Storage Installa-

tion (Water-Basin Type).")

ANSI/ASME OM-1987, "Operation and Maintenance of

Nuclear Power Plants," Part 3 - "Requirements for Preoperational

and Initial Startup Vibration Testing of Nuclear Power Plant

Piping Systems."

ANSI/ANS 57.9-1984, "Design Criteria for an Inde-

pendent Spent Fuel Storage Installation (Dry Storage Type)."

ANSI/ASTM C1010-1983 (R1988), "Standard Guide for

Acceptance, Checkout, and Pre-Operational Testing of a Nuclear

Fuels Reprocessing Facility."

ANSI/ASTM C1062-1986, "Standard Guide for Design,

Fabrication, and Installation of Nuclear Fuel Dissolution

Facilities."

ANSI/ASTM C1068-1986, "Standard Guide for

Qualification of Measurement Methods by a Laboratory Within the

Nuclear Industry."

ANSI/ASTM C1112-1988, "Standard Guide for Applica-

tion of Radiation Monitors to the Control and Physical Security

of Special Nuclear Material."

4.5.4

Supplementary Information

TID-10620, "Report on Glove Boxes and Containment

Enclosures," USAEC.

NUREG/CR-4215, "Technical Factors Affecting Low-

Level Waste Form Acceptance Criteria," Mackenzie, D.R., et al.,

Brookhaven National Laboratory, May 1985.

NUREG/CR-4056, "Particulate and Gas Release from

Light Water Reactor (LWR) Fuel Rods Stored in Inert and Dry Atmo-

spheres," Oslen, C.S., EG&G, Inc., January 1985.

NUREG/CR-3798, "Characterization of Cement and

Bitumen Waste Forms Containing Simulated Low-Level Waste

Incinerator Ash," Westsik, J.H., Battelle Pacific Northwest

Laboratories, August 1984.

4-12