Environemental, Design and Qualification of Mechanical and Electrical Equipment

DOE-STD-10192

Supplementary Information

3.9.4

NUREG103O, "Seismic Qualification of Equipment in

Operating Nuclear Power Plants," USNRC, February 1987.

NUREG/CR-3914, "Pump and Valve Qualification Review

Guide," Miller, B.E., Brookhaven National Laboratory, October

1985.

NUREG/CR-3875, "The Use of In-Situ Procedures for

Seismic Qualification of Equipment in Currently Operating

Plants," Sadik, S. et al., EG&G Inc., June 1984.

NUREG/CR-3266, "Seismic and Dynamic Qualification

of Safety-Related Electrical and Mechanical Equipment in Operat-

ing Nuclear Power Plants," Curreri, J. et al., Brookhaven

National Laboratory, September 1983.

3.10.1

Code of Federal Regulations

10 CFR 50.49, "Environmental Qualification of Elec-

trical Equipment Important to Safety for Nuclear Power Plants."

3.10.2

Regulatory Guides

Regulatory Guide 1.89, "Environmental Qualification

of Certain Electrical Equipment Important to Safety for Nuclear

Power Plants."

Regulatory Guide 1.158, "Qualification of Safety-

Related Lead Storage Batteries for Nuclear Power Plants."

Regulatory Guide 3.49, "Design of an Independent

Spent Fuel Storage Installation (Water Basin Type)."

Regulatory Guide 3.60, "Design of an Independent

Spent Fuel Storage Installation (Dry Storage)."

3.10.3

Codes and Standards

ANSI/ANS 57.7-1988, "Design Criteria for an Inde-

pendent Spent Fuel Storage Installation (Water Pool Type)."

ANSI/ANS 57.9-1984, "Design Criteria for an Inde-

pendent Spent Fuel Storage Installation (Dry Storage Type)."

3-23