 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|  DOE-STD-1030-96
2. OBJECTIVE
The objective and criteria are derived from DOE Order 5480.19. They are intended to aid
each facility in meeting the intent of the order.
A lockout/tagout program is implemented to provide protection to personnel and equipment,
and to aid in the control of equipment and system status.
Criteria:
1.
Locks and tags are used when controls must be established to protect personnel,
equipment, or the environment.
2.
The facility lockout/tagout program is implemented through physical and administrative
controls on sources of energy and hazardous materials.
3.
Protective materials and hardware are provided to control sources of energy and
hazardous material.
4.
Procedures are developed and used to control and document the application of
lockouts/ tagouts.
5.
Lockout/tagout procedures provide instruction for all aspects of energy control
including notifications, equipment shutdown, isolation, application of locks and tags,
verification, release, removal, and restoration to operational status.
6.
Requirements are specified for temporary or partial removal of a lockout/tagout for
testing or equipment positioning.
7.
Periodic inspection and review of lockout/tagout implementation are performed.
8.
All personnel receive appropriate training in the safe application, use, and removal of
lockouts/tagouts.
9.
The lockout/tagout program specifies actions that must be taken when other than
facility personnel (e.g., vendors, subcontractors, etc.) perform work on equipment.
10. The lockout/tagout program identifies any special requirements for maintenance
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals