D OE-STD -1065-94
INSTRUCTIONS FOR COMPLETING POST MAINTENANCE
TEST CONTROL FORM
The Maintenance Supervisor should ensure that the Test Form Preparer
(typically the planner estimator) has provided on the form the equipment
identification, the MJR number, description of the test, the test instructions
and attachments, signatures, badge numbers, and dates.
The Maintenance Supervisor should ensure that the Test-Start Approval
signature, badge number, and date have been obtained from the Equipment
Owner, (or designee) prior to starting test.
The Test Performer should fill in the Test Results (Comments) section of
form, indicating whether test was Satisfactory or Unsatisfactory and any
Corrective Actions taken, if applicable.
Upon completion of test the Test Performer should sign, add badge number,
The Maintenance Supervisor should obtain signature, badge number, and
date from the Equipment Owner in the applicable Test Accepted By section.
The Maintenance Supervisor should sign, add badge number and date to
indicate test acceptance in the applicable Test Accepted By section.
The Test Performer and Maintenance Supervisor should ensure that the
PMT Control Form is kept together with the complete job package.
If an equipment-specific data sheet and a PMT procedure are
available, they may be referenced instead of duplicating the
The location of the completed data sheets, if separate from the
job package, should be identified.
A ppropriate signatures on this PMT Control Form are
required and should be returned to the PE w ith the job
Privacy Statement - Press Release - Copyright Information. - Contact Us