|
| DOE-STD-3013-2000
APPENDIX A
Technical Bases for Stabilization, Packaging and Storage of
Plutonium-Bearing Materials
This appendix summarizes the technical bases for the criteria in the body of this Standard. The
section numbers in this appendix correspond to the section numbers in the body of the
Standard.
The intent of this appendix is to provide the logic underlying the technical bases, to summarize
the salient technical points and to provide guidance where applicable. The reader is directed to
the primary technical source information for the technical details.
A.1. Scope
This Standard establishes criteria for stabilization, packaging, and safe, long-term storage of
plutonium-bearing metal and oxides at DOE facilities. Storage packages that meet these criteria
should maintain their integrity (i.e., should not require repackaging) for a minimum of 50 years.
This Standard applies to plutonium-bearing oxides and metals containing at least 30 wt%
plutonium plus uranium. It may be used for metallic weapons components, including those that
are classified, but it is not intended for pits. The scope of DOE-STD-3013-96 [USDOE 1996] is
limited to materials containing at least 50 wt% plutonium. Information developed since the
issuance of that standard demonstrates that a broader range of oxide materials, including those
with lower plutonium assays, stabilized in accordance with the criteria of this Standard, can be
packaged and stored safely. Stabilization data gathered from the Materials Identification and
Surveillance (MIS) program and other information sources for oxide materials is considered
adequately robust to support selection of 30 wt% plutonium plus uranium as the lower cutoff
for this Standard. The scope for this Standard covers essentially all non-fabricated materials of
interest to Defense Programs and captures the vast majority of excess materials that will be
accepted by the Materials Disposition Program for disposition [USDOE 1998] or conversion to a
mixed plutonium-uranium oxide.
15
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |