Data base content elements - std301320000020

DOE-STD-3013-2000

6) Specific stabilization conditions to include date, temperature, processing duration

and equipment used and atmosphere (and a notation that a qualified process

was used, if applicable);

7) Particle density of the material and method by which determined, or reference to

a model that demonstrates such information is not needed to establish a

limitation on the mass loading; and

8) Other information relative to the contents such as expected major impurities with

source of impurity data (e.g., process knowledge, destructive analysis, or X-ray

fluorescence analysis).

2. The data base shall include, as a minimum, identification of the following package

characteristics:

1) Nominal fill gas composition of each container on sealing (e.g., air, helium, or

argon);

2) Leak test data record for the outer and inner containers in the package;

3) Package configuration - quantity and type of containers in a package;

4) Date of packaging for each container;

5) Initial radiation field [gamma and neutron at contact and 300 mm (12 in.)],

including how it was measured;

6) Baseline Package gross weight, dimensions, and tare weight;

7) The unique identification number and TID number, if any, associated with each

container; and

8) The manufacturer lot identification number for each container.

3. The data base shall include, as a minimum, the following records from surveillance

and inspections:

1) Surveillance results;

2) Records of tests performed;

3) Dates of inspections; and

4) Names of individuals performing inspections.