Packaging,Shipping, and Storage

DOE-STD-3020-97

6.2.4

Accepted and Rejected Filters. Accepted filters shall be marked as

specified in DOE standards.

7.0

PACKAGING, SHIPPING, AND STORAGE

7.1

Packaging and Shipping for Testing

Packaging. HEPA filters shall be packed in individual, durable

7.1.1

containers which meet applicable shipping regulations.

Preparation for Delivery. The contractor's shipping instructions shall

7.1.2

specify that HEPA filter cartons be crated or placed on a pallet to

minimize unit handling, particularly at public carrier interchange

points. Filters should not be stacked more than three (3) high. For

large shipments, it is recommended that the entire shipment be

shipped in a sealed, dedicated trailer or rail car. At all times the

filters must be handled with care and properly orientated.

7.1.3

Packaging , Shipping and Storage. Packaging, shipping and storage

shall be in accordance with NQA-2, level B.

7.2

Shipping

HEPA filters to be tested shall be shipped to the address below, as agreed to

by the procurement specialist and the vendor.

Lockheed Martin Energy Systems

K-25 Site, Building K-1024

Oak Ridge, Tennessee 37830

Attention: Filter Test Facility