|
| DOE-STD-3028-2000
FOREWORD
1. This Department of Energy (DOE) Standard is approved for use by all DOE organizations
and their contractors holding inventories of special nuclear material (SNM) in quantities of at
least low strategic significance (>15 g [0.033 lbm ] U-233) [10 CFR 70.4]. This Standard
deals with stabilization, packaging, and storage of separated 233U-bearing materials.
2. Comments (recommendations, additions, deletions) and pertinent data that may improve
this document should be sent to the Technical Standards Project Office by letter or by using
the self-addressed Document Improvement Proposal (DOE F 1300.3).
3. DOE Technical Standards do not establish requirements. However, all or part of the
provisions in a DOE standard can become requirements under the following circumstances:
(1) the provisions are explicitly stated to be requirements in a DOE requirements document;
or
(2) the organization makes a commitment to meet a standard in a contract or in an
implementation plan or program plan required by a DOE requirements document.
4. Throughout this Standard, the word "shall" is used to denote actions that must be performed
if the objectives of this Standard are to be met. If the provisions of this Standard become
requirements through one of the ways discussed above, then the "shall" statements would
become requirements.
vii
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |