Setup for Mock Exercise

Radiological Assessor Training

DOE-HDBK-1141-2001

Instructor's Guide

Setup for Mock Exercise

Radiological Work Site

Mockup Demonstration

Checklist for Module 11

(continued)

Complete the following tasks prior to the implementation of

the mock-up exercise:

θ Install PVC containment supports, pipe with valve and

glove bag.

θ Place a tear in one finger of a glove attached to a glove

bag (large enough to stick a finger through).

θ Open both isolation (green-handled) valves.

θ Prepare a "hot spot" label and write "500 mrem/hr" on

the label.

θ Stick label onto mock hot spot and place yellow lead

blanket over it.

θ String yellow and magenta poly rope through stanchions

to establish mock radiological area.

θ Place defective signs (wrong color or wording) onto the

rope; for example, "Radiation Zone."

θ Place poly bottle in background (5 ft behind containment

supports).

θ Place a yellow plastic waste bag just outside the

radiological area.

θ Prepare RWP for this job showing High Radiation Area,

Radiological Buffer Area, thermoluminescent

dosimeters (TLDs) and pocket dosimeters, continuous

Radiological Control Technician coverage, and pre-job

briefing required (instructor reviews with the class

members in an earlier session).

θ Brief players before mock exercise (see Module 11 of

Instructor's Guide).

θ Dress players (include "maternity padding" for DOE

Representative).

θ Paint simulated cut on right hand of Worker 2.

Module 11 4