Detection of Contamination - doe-hdbk-1106-97

DOE-HDBK-1106-97

Lesson Plan

Instructor's Notes

3. If the count rate increases during frisking (such as the

audible signal), pause for 5-10 seconds over the area to

provide adequate time for instrument response.

4. Carefully return the probe to holder.

5. Keep the instrument close to the work area to facilitate

frequent checking of hands and fingers.

E. Detection of Contamination

If contamination is indicated:

1. Remain in the immediate area.

2. Notify Radiological Control personnel.

3. Minimize cross-contamination (such as putting a glove

on a contaminated hand until decontamination can be

attempted).