Ancillary Sources - doe-hdbk-1108-2002

DOE-HDBK-1108-2002

Radiological Training for Accelerator Facilities

Instructor's Guide

Lesson Plan

Notes

Compounds: such as grease, sealants, gaskets, and

anti-seize coatings may be activated depending on

their composition. Prior to maintenance, these

compounds should be chosen carefully to minimize the

production of contamination if possible. These

materials may not be accessible until after components

are disassembled; therefore, the need for carefully

planned maintenance activities involving such

compounds should be highlighted.

Show picture of

Impurities: Impurities in cooling water systems can be

filter/resin media or

a source of contamination. This source may be found

bed as applicable.

in a filter/resin media system.

Activities: (Facility-Specific) routine work areas

where contamination control must be considered:

Machining of radioactive materials.

Cooling water filters.

Accessing beamline.

Maintenance.

Target removal.

Etc.

EO-09 IDENTIFY

ancillary sources at

Ancillary Sources

site.

Accelerators employ devices to impart energy to particles or redirect

them during the acceleration process. These devices may emit ionizing

radiation while they are operating.