Explosion

DOE-STD-1120-2005/Vol. 2

Provides safety standards and procedures used to implement the requirements

DOE M 440.1-1 (3/28/00)

Physical

Explosion

of DOE O 440.1 for operations involving explosives, pyrotechnics, and

Non-nuclear and Explosives Safety Criteria

propellants, or assemblies containing these materials.

Guide for use with DOE O 420.1 Facility

Safety

29 CFR 1910.109 *

Primarily applicable only during decommissioning. This regulation contains

Explosives and Blasting Agents

requirements for handling, storing, transporting, and using explosives and

blasting agents in general industry operations.

29 CFR 1926 Subpart U *

Primarily applicable only during decommissioning. This section contains

Blasting and the Use of Explosives

requirements for the use, transportation, and storage of explosives, blasting

agents, and equipment in construction operations.

29 CFR 1926 Subpart L *

Provides requirements for the construction and use of various types of

Physical

Elevation

Scaffolding

scaffolds for construction.

29 CFR 1926 Subpart M *

Sets forth requirements and criteria for fall protection in construction

Fall Protection

workplaces covered under 29 CFR 1926.

Covers the use, employee protection and hazard control, maintenance,

29 CFR 1926 Subpart N *

testing, and equipment associated with cranes, derricks, hoists, elevators, and

Cranes, Derricks, Hoists, Elevators, and

conveyors used for construction.

Conveyors

DOE-STD-1090-04

Provides guidance for safely performing hoisting and rigging activities.

Hoisting and Rigging

29 CFR 1910 Subpart S *

Addresses electrical safety requirements necessary for the practical

Physical

Electrical

safeguarding of employees in their workplaces. Includes design safety

standards for electrical systems, safety-related work practices and

maintenance requirements, and safety requirements for special equipment.

29 CFR 1926 Subpart K *

Addresses electrical safety requirements necessary for the practical

Electrical

safeguarding of employees involved in construction work. Includes

installation safety requirements, safety-related work practices, safety-related

maintenance and environmental considerations, and safety requirements for

special equipment.

29 CFR 1910.333 *

Details requirements to prevent electric shock or other injuries from work on

Selection and Use of Work Practices

or near electrical equipment. Includes provisions for locking and tagging out

circuits.

29 CFR 1926.417 *

Provides requirements and procedures for locking and tagging controls and

Lockout and Tagging of Circuits

circuits when an employee is exposed to contact with deactivated electric

equipment or circuits.

A-19