Electrical - doe-std-1120-2-20050025

DOE-STD-1120-2005/Vol. 2

DOE-STD-1030-96

Provides guidance on good practices associated with lockouts and tagouts.

Physical

Electrical

Guide to Good Practices for Lockouts and

Tagouts

29 CFR 1910.146 *

Contains requirements for practices and procedures to protect employees in

Physical

Confined

Permit-required Confined Spaces

general industry (excluding construction) from the hazards of entry into

Space

permit-required confined spaces. Requirements include a Permit Space

Program.

29 CFR 1926 Subpart P *

Primarily applicable only during decommissioning. Contains requirements

Excavations

for the protection of employees working in and around all open excavations

(including trenches) and requirements for protective systems (e.g., sloping,

shield systems, etc.).

29 CFR 1910 Subpart Q *

Provides requirements for gas welding and cutting, arc welding and cutting,

Physical

Other

Welding, Cutting, and Brazing

fire prevention and ventilation, and protection for welding operations.

Physical

Hazards

29 CFR 1926 Subpart J *

Provides requirements for construction operations for gas welding and

Welding and Cutting

cutting, arc welding and cutting, fire prevention and ventilation, and

protection for welding operations.

29 CFR 1910.94 *

Provides requirements for ventilation for abrasive blasting, grinding,

Ventilation

polishing and buffing operations, spray finishing operations, and open surface

tanks.

29 CFR 1926.57 *

Provides requirements for ventilation for abrasive blasting, grinding,

Ventilation

polishing and buffing operations, spray finishing operations, and open surface

tanks.

29 CFR 1910.95 *

Establishes allowable noise levels and the protection requirements when

Occupational Noise Exposure

those levels are exceeded.

29 CFR 1926.53 *

Establishes allowable noise levels and the protection requirements when

Occupational Noise Exposure

those levels are exceeded.

29 CFR 1910 Subpart O *

Details requirements for the use, maintenance, and guarding of machinery,

Machinery and Machine Guarding

including mechanical power-transmission apparatus.

29 CFR 1926 Subpart I *

Provides requirements for the use, maintenance, and guarding of hand and

Tools--Hand and Power

power tools, including mechanical power-transmission apparatus.

A-20