Evaluator Instructions

DOE-HDBK-1078-94

ATTACHMENT 12

SAMPLE TRAINING/EVALUATION STANDARD (TES)

(continued)

Performance Test: TASK NO. 505021--HEALTH PHYSICS TECHNICIAN

HPT-ST-303, Portable Survey Equipment

Prerequisites:

HPT-ST-302, Performing Radiation Surveys

HPT-RO-101, Principles of Radiography

Qualified Radiation Worker.

Affected system tagged out (if required) and prepared for radiography.

Conditions:

Instructions to Trainee--You are to perform the required radiation surveys in support of the selected radiography

operation. You must acquire the necessary references and equipment, and complete all required documentation. If you

perform a critical step improperly, or do a step out of sequence, you will fail this performance test.

Action Step

Criteria

Initials

C --Obtain references

C --Obtain equipment

S/C--Perform preoperational check of

Preoperational checks performed

portable radiation monitoring

(IAW Equipment Technical

equipment

Manual).

S/C--Verify posting of the area

Posted in accordance with SOP

affected by the radiography

WPS-14871.

S/C--Complete the Radiography

Checklist

S/C--Determine radiation levels

Surveyed in accordance with IPM

IV-10 and SOP WPS-14871.

S/C--Record survey data

S/C--Complete the Source Survey

Checklist

S/C--Submit survey data

10.

Return equipment

Equipment returned to proper

storage location.

11.

Return references

References returned to proper

storage location.

Evaluator Instructions--The trainee is to perform this test, without assistance, on the job site. An

implied standard of "without error" is assumed for procedural step completion. Provide clarification of

requirements if requested by trainee. You are encouraged to ask relevant questions to verify trainee

understanding. If a trainee fails this performance test, clearly document the reason for failure, and forward

the documentation to the trainee's immediate supervisor. Successful completion of this performance test

is to be recorded on the trainee's qualification card.

(S) Sequence is important. This step must be performed only after the preceding step(s).

Codes:

Approved by:

Date:

(Manager)

105