Remote retrieval of a 1000 Curie source from the Storage Canal using Auxiliary Retrieval Equipment cont'd

DOE-HDBK-1099-96

APPENDIX B - EXAMPLE DRILL SCENARIOS

Title:

Remote retrieval of a 1000 Curie source from the Storage Canal using Auxiliary

Retrieval Equipment (table-top discussion with walkthrough to follow or in-plant

perform)

Drill Number: 01-001

Revision Number: 0

Drill Team Duties: Provide cues and props as required to make the drill effective.

Evaluator: Listen to the description for the manual operation for removal of the primary crane

from the operating area of the canal and the subsequent setup of the auxiliary

retrieval equipment. Ensure that facility procedures are used for all operations and

that all communications are such that the operation can be understood and

personnel could act accordingly.

Safety Monitor:

For in-plant drills, verify that the dummy source is suspended from the

primary crane. The dummy source can be verified by its black and

orange color scheme. Combined with evaluator duties for discussion drill.

Ensure that all operations would be performed by facility procedures with

all attendant approvals. If operator would place facility personnel, the

environment, or equipment in jeopardy, the safety monitor is to signal the

end of the drill.

Drill Initiation: Describe the initial conditions to the operator, then have the crane operator

inform the Control Room that the primary crane has malfunctioned and will not

respond to either the main or backup controls.

B 5-3