Scope - std10820009

DOE-STD-1082-94

1. SCOPE

1.1 Scope. This standard describes an acceptable method to prepare,

review, and approve implementation plans for DOE nuclear safety requirements.

DOE requirements are identified in DOE Rules, Orders, Notices, Immediate Action

Directives, and Manuals (hereinafter referred to as DOE requirements

documents).

1.2 Applicability. This standard is intended for use by all DOE

organizations and their contractors when preparing, reviewing or approving

implementation plans for DOE nuclear safety requirements.

Implementation plans are called by a variety of names in the DOE nuclear safety

requirements documents. For example, in 10 CFR Part 835, they are met by the

Radiation Protection Programs (RPPs); and in the proposed 10 CFR Part 834

they are met by Environmental Radiation Protection Programs (ERPPs). All of

these plans and programs, as well as a number of other plans and programs

identified in other DOE nuclear safety requirements documents, are considered to

be implementation plans for DOE nuclear safety requirements. Consequently, the

provisions of this technical standard apply to the preparation, review, and

approval of those plans. The Operations Office point-of-contact should be

contacted if clarification is needed on the applicability of this standard to specific

plans and programs.

2. REFERENCES

DOE ORDER 5480.23, NUCLEAR SAFETY ANALYSIS REPORTS

10 CODE OF FEDERAL REGULATIONS (CFR) PART 820, PROCEDURAL

RULES FOR DOE NUCLEAR ACTIVITIES.

10 CFR PART 830, NUCLEAR SAFETY MANAGEMENT

10 CFR PART 834, RADIATION PROTECTION OF THE PUBLIC AND THE

ENVIRONMENT

10 CFR PART 835, OCCUPATIONAL RADIATION PROTECTION