Receipt of Filters - std30250013

DOE-STD-3025-99

Operating and calibration procedures for each penetration and resistance test

device.

Test and inspection reports, including disposition and retention.

Labeling of accepted and rejected filters.

Segregation and disposition of rejected filters.

Shipping of accepted filters.

Preparation of semiannual reports to DOE.

Training and qualification of personnel.

Surveys or precautions taken for protection of health, safety, and the

environment.

RECEIPT OF FILTERS

6.1

Receiving Inspection

All filter packages shall be inspected upon receipt at the FTF. Damaged cartons or

cartons improperly oriented shall be opened immediately and the filters inspected. A

description of observed damage shall be recorded in the filter inspection and test report.

6.2

Initial Handling and Storage

Filter handlers shall be properly trained to handle filter boxes carefully. Cartons shall be

oriented with arrows on the filter cartons pointed "up". Filter cartons shall be stacked

not more than three (3) high, and stored in a clean, dry location. Unless otherwise

required, storage facilities for HEPA filters shall be equipped with temperature and

humidity controls.

6.3

Pre-Test Filter Damage Inspection

Prior to testing, each filter shall be visually examined for possible damage, compliance

with purchaser's specifications, and workmanship. Damage to filters noted during the

pre-test inspection shall be recorded on the filter inspection and test report. Filters

obviously damaged shall not be further tested, but shall be immediately rejected.