Measuring and test equipment identification

DOE-STD-1029-92

[11]

Ensure that range and accuracy of measuring equipment are consistent with the

expected values to be measured.

[12]

Determine when data concerning test equipment (for example, serial numbers or

calibration dates) must be recorded. Provide space in the procedure or in an

appendix to record the data before the user encounters action steps which use the

test equipment for critical measurements.

[13]

Specify verification and performance checks or special controls required before the

equipment is used. If the performance check is done just before use, include the

check in the body of the procedure rather than in the prerequisite actions section.

EXAMPLE 3-16. Measuring and test equipment identification.

[3]

Obtain two stopwatches (calibrated and approved by Quality Assurance Lab), and complete

Table 4-2.

TABLE 4-2

M&TE No.

Expiration Date

Performer Initials

3.5.4 Field Preparations

[1]

Provide instructions for preparatory field activities that must be completed before

continuing with the procedure. Examples of these activities are listed below.

C Lock-out/tag out of equipment

EXAMPLE 3-17. Tag out action step.

[4]

Verify that the GM Diesel unit to be inspected has been tagged out.