Post-performance Activity

DOE-STD-1029-92

[1]

Organize activities in the order that they will be performed.

[2]

Divide the performance sections into subsections that logically group related

activities as established in the procedure basis outline.

[3]

Use headings for each subsection that reflect the activity rather than a generic title

(for example, "Removing the Actuator," rather than "Actuator").

[4]

Write the specific action steps within the performance sections in accordance with

Section 4 of this guide.

3.7

Post-performance Activity

The post-performance activity section stipulates actions needed to close out the activity

including testing, restoration, and compiling results.

3.7.1 Testing

[1]

If operability of equipment has been affected while performing a procedure and

operability has to be verified before returning the equipment to service, include

action steps that specify these tests.

3.7.2 Restoration

[1]

Provide action steps to specify and record the return of all affected structures,

systems, or equipment to the desired configuration.

[2]

Include instructions for

C Required restoration adjustments, storage, or maintenance of laboratory and

process equipment

C The return of tools and equipment

C The proper disposal or storage of consumables such as test samples or

chemicals not used in the process.

[3]

Provide space for recording the notification of appropriate personnel that the

system has been returned to service.

[4]

Include provisions for close out of any permits (such as confined entry permits)

that were required to perform the procedure.

[5]

Provide for verification of appropriate restoration action steps.