Safety Analysis Report

DOE-STD-6003-96

9. Hazardous material protection;

10. Analysis of normal, abnormal, and accident conditions, including design basis

accidents; assessment of risks; consideration of natural and man-made exter-

nal events; assessment of contributory and causal events, mechanisms, and

phenomena; and evaluation of the need for an analysis of beyond design

basis accidents, however, the SAR is to exclude acts of sabotage and other

malevolent acts since these actions are covered under security protection of

the facility;

11. Management, organization, and institutional safety provisions;

12. Procedures and training;

13. Human factors;

14. Initial testing, in-service surveillance, and maintenance;

15. Derivation of the TSRs;

16. Operational safety;

17. Quality assurance;

18. Emergency preparedness;

19. Provisions for decontamination and decommissioning;

20. Applicable facility design codes and standards.

A recommended guide for the format and content for the SAR is contained in DOE-STD-

3009 (DOE 1994). This Standard was specifically generated to provide guidance on the format

for Hazard Category 2 and 3 facilities. Due to the lack of SAR format guidance for Category 1

facilities, it is recommended that the format guidance for Hazard Category 1 facilities use the

same format guidance as provided in DOE 1994. This Standard also provides a "risk-based pri-

oritization approach" application for facilities with varying degrees of hazards and potential

consequences.

For Below Hazard Category 3 facilities, the following items should be addressed in the

safety analysis in appropriate detail to the extent practical:

a. facility mission or purpose;

b. a description and evaluation of the site;

c. design criteria for SSCs;